Asus DSEB-DG/SAS Computer Hardware User Manual


 
ASUS DSEB-DG Series 2-13
Notes on Intel
®
Hyper-Threading Technology
This motherboard supports Intel
®
Xeon™ CPUs in the 771-land package
with Hyper-Threading Technology.
Hyper-Threading Technology is supported by Intel
®
5000 series CPU only.
5100/5200/5300/5400 series DO NOT support Hyper-Threading.
The amount of CPU threads depends on the OS support.
Hyper-Threading Technology is supported under Windows
®
XP/2003 Server
and Linux 2.4.x (kernel) and later versions only. Under Linux, use the
Hyper-Threading compiler to compile the code. If you are using any other
operating systems, disable the Hyper-Threading Technology item in the
BIOS to ensure system stability and performance.
Installing Windows
®
2003 Server or later version is recommended.
Make sure to enable the Hyper-Threading Technology item in BIOS before
installing a supported operating system.
For more information on Hyper-Threading Technology, visit Intel
®
website
(
www.intel.com/info/hyperthreading
).
To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel
®
Xeon™ CPU that supports Hyper-Threading Technology.
2. Power up the system and enter the BIOS Setup (see Chapter 4: BIOS
setup). Under the Advanced Menu, make sure that the item Hyper-Threading
Technology is set to Enabled. The item appears only if you installed a CPU
that supports Hyper-Threading Technology.
3. Reboot the computer.
The CPU ts in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
6. Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
A
B