Asus E3611 Computer Hardware User Manual


  Open as PDF
of 188
 
4-4 Chapter 4: BIOS setup
To update the BIOS using EZ Flash 2:
 
the motherboard.
 
3. You can launch the EZ Flash 2 by two methods.
 
Press <Alt> + <F2> during POST to display the following.
4.1.2 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to
go through the long process of using a DOS-based utility. The EZ Flash 2 utility
is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the
Power-On Self Tests (POST).
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2
and press <Enter> to enable it.

is found. Then press <Enter>.
ASUSTek EZ Flash 2 BIOS ROM Utility B324
FLASH TYPE: Winbond W39V080A 8Mb LPC
BOARD: STRIKER II FORMULA
VER: 0201
DATE: 11/05/2007
Current ROM
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select [S] Save [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
 
with
FAT 32/16/12 format only
.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
 
process and automatically reboots the system when done.
 previous next