Filter
Top Products
4-16
Chapter 4: BIOS Setup
HyperTransport Configuration
HT Tristate Enable [Enabled]
Enables or disables the HyperTransport Tristate that enables the tristate
link during the disconnected state of an LDTSTOP.
Configuration options: [Disabled] [Enabled]
CRC Flood Enable [Disabled]
Enables or disables the CRC Flood that enable the generation of
syncronized packets on CRC Error.
Configuration options: [Disabled] [Enabled]
HT Frequency [800 MHz]
Allows frequency selection of HyperTransport transfer from K8 CPU to
AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]
HT DATA Width (Upstream) [16 BIT]
Allows selection of HyperTransport upstream data width.
Configuration options: [16 BIT] [8 BIT]
HT DATA Width (Downstream) [16 BIT]
Allows selection of HyperTransport downstream data width.
Configuration options: [16 BIT] [8 BIT]
HyperTransport Configuration Enabled link tristate
during the disconnect
HT Tristate Enabled [Enabled] state of an LDTSTOP
CRC Flood Enable [Disabled]
HT Frequency [800 MHz]
HT DATA Width (Upstream) [16 BIT]
HT DATA Width (Downstream) [16 BIT]