Filter
Top Products
4-26
Chapter 4: BIOS Setup
4.4.5 JumperFree Configuration
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
IRQ xx [Available]
When set to [Available], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [Available] [Reserved]
CPU FSB Frequency [200MHz]
This item allows you to adjust the CPU FSB operating frequency.
Configuration options: [200MHz] [201 MHz] ~ [300MHz]
CPU Speed/Voltage Setting [Auto]
This item allows you to set a specific VCore offset voltage.
Configuration options: [Auto] [Manual]
CPU Speed [800 MHz]
Allows you to manually set the CPU speed. This item appears only when
the CPU Speed/Voltage Setting item is set to Manual.
Configuration options: [800 MHz] [900 MHz] [1000 MHz] [1100 MHz]
[1200 MHz] [1300 MHz] [1400 MHz] [1500 MHz] [1600 MHz] [1700 MHz]
[1800 MHz] [1900 MHz] [2000 MHz]
Configure System Frequency/Voltage
CPU FSB Frequency [200 MHz]
CPU Speed/Voltage Setting [Auto]
DDR Voltage [Auto]
AGP Voltage [1.5V]
V-Link Voltage [2.5V]
Performance Mode [Auto]