Filter
Top Products
4-24
Chapter 4: BIOS Setup
OnBoard Promise Controller [Enabled]
Allows you to enable or disable the onboard Promise
®
RAID controller.
Configuration options: [Disabled] [Enabled]
Operating Mode [RAID]
This item sets the onboard Promise controller operating mode. This
item appears only when the Onboard Promise Controller item is set to
Enabled. Configuration options: [RAID] [Onboard IDE Operate Mode]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
OnBoard 1394 [Enabled]
Allows you to enable or disable the onboard IEEE1394 controller.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
EPP Version [1.9]
Appears only when the Parallel Port Mode is set to [EPP]. This item
allows you to to select the Parallel Port EPP version.
Configuration options: [1.9] [1.7]