Asus K8V-MX Computer Hardware User Manual


 
ASUS K8V-MX Motherboard 1-21
1.10.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy drive (FDD) signal cable. Insert one
end of the cable to this connector, then connect the other end to the signal
connector at the back of the floppy disk drive.
2. Internal audio connector (4-pin CD, AUX)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
K8V-MX
R
K8V-MX Floppy disk drive connector
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
K8V-MX
R
K8V-MX Internal audio connectors
CD (Black)
Right Audio Channel
Left Audio Channel
Ground
AUX (White)
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.