Filter
Top Products
2-20 Chapter 2: BIOS Information
OnBoard ACʼ97 Audio [Enabled]
Selecting [Enabled] allows the BIOS to detect whether you are using any
audio device. If an audio device is detected, the onboard audio controller
is enabled. If no audio device is detected, the controller is disabled.
Configuration options: [Enabled] [Disabled]
OnChip SATA [Enabled]
Enables or disables the OnChip Serial ATA. Configuration options: [Enabled] [Disabled]
OnChip SATA BOOTROM [Enabled]
Enables or disables the Serial ATA Boot ROM. Configuration options: [Enabled] [Disabled]
OnBoard SATA-IDE [RAID]
Allows you to set the mode of the OnBoard SATA-IDE mode. Configuration options:
[RAID] [SATA]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller. Configuration options:
[Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN Boot ROM. Configuration options:
[Disabled] [Enabled]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address. Configuration options:
[Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel port base addresses. Configuration options:
[Disabled] [378] [278] [3BC]
Parallel Port Mode [Bi-Directional]
Allows you to select the Parallel port mode. Configuration options: [Normal] [Bi-
Directional] [EPP] [ECP]
Parallel Port IRQ [IRQ7]
Allows you to select the Parallel Port IRQ. Configuration options: [IRQ5] [IRQ7]