Asus K8V-MX Computer Hardware User Manual


 
ASUS K8V-MX Motherboard 2-19
2.4.3 Onboard Devices Configuration
Onboard Floppy Controller [Enabled]
Enables or disables the Onboard Floppy Controller.
Configuration options: [Enabled] [Disabled]
Onboard Floppy Controller [Enabled]
OnBoard AC’97 Audio [Enabled]
OnChip SATA [Enabled]
OnChip SATA BOOTROM [Enabled]
Onboard SATA-IDE [RAID]
OnBoard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Serail Port2 Address [2F8/IRQ3]
Parallel Port Address [378]
Parallel Port Mode [Bi-Directional]
Parallel Port IRQ [IRQ7]
Allows BIOS to Enable
or Disable Floppy
Controller.
v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
USB Mass Storage Reset Delay [20 Sec]
Allows you to set the time USB Mass Storage Reset Delay will cost.
Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]
Device #1USB Flash Disk
Emulation Type [Auto]
Allows you to set the Emulation Type for #1 USB Flash Disk.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] [No
Emulation]
Device #2USB Flash Disk
Emulation Type [Auto]
Allows you to set the Emulation Type for #2 USB Flash Disk.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] [No
Emulation]