Filter
Top Products
2-14 Chapter 2: BIOS Information
Memory Configuration
Memory Configuration
Memclock Mode [Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or
select [Manual] to set using one of the standard values. Configuration options:
[Auto] [Limit]
MCT Timing Mode [Auto]
Allows you to set the MCT Timing Mode manually or auto. Configuration
options: [Auto] [Manual]
User Config Mode [Auto]
Sets the User Config Mode. Configuration options: [Auto] [Manual]
Burst Length [4 Beats]
Sets the Burst Length. Configuration options: [8 Beats] [4 Beats] [2 Beats]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Clock to All DIMM. Configuration options:
[Disabled] [Enabled]
SoftWare Memory Hole [Enabled]
Allowsyou to enable or disable the SoftWare memory Hole. Configuration
options: [Disabled] [Enabled]
HardWare Memory Hole [Enabled]
Allowsyou to enable or disable the HardWare memory Hole. Configuration
options: [Disabled] [Enabled]
Memory Configuration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
User Config Mode [Auto]
Burst Length [4 Beats]
Enable Clock to All DIMMs [Disabled]
SoftWare Memory Hole [Enabled]
HardWare Memory Hole [Disabled]
MEMCLK can be set
by the code using
AUTO, or if you use
LIMIT, you can set
one of the standard
values.
Memory Configuration
Memory Configuration