Filter
Top Products
2-30 Chapter 2: BIOS setup
2.5.5 APM Conguration
APM Conguration
Restore on AC Power Loss [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By External Modems [Disabled]
Power On By PCI/PCIe Devices [Disabled]
RTC Resume [Disabled]
Restore on AC Power Loss [Disabled]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and
try. Turning an external modem off and then back on while the computer is off
Power On By PCI/PCIe Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead.
Options
Disabled
Power On
Power Off
Last State