Asus M2A-MVP Computer Hardware User Manual


 
2-34 Chapter 2: BIOS setup
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo™ feature.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.

Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.

PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.

Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error

Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run Setup”

Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.

2.6.3 Security
The Security menu items allow you to change the system security settings. Select

4.6.1 Boot Device Priority
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Passward
<Enter> to change
password.
<Enter> again to
disabled password.