Filter
Top Products
ASUS M2A-MVP 2-41
2.9.1 Installing hard disks
The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives.
For optimal performance, install identical drives of the same model and capacity
when creating a disk array.
Installing Serial ATA (SATA) hard disks
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.
2.9.2 ULI
®
RAID congurations
The ULI
®
RAID controller supports RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD
®
Entering the ULI
®
RAID BIOS Setup Utility
To enter the ULI
®
RAID BIOS setup utility:
1. Boot up your computer, and press <Del> during POST to enter the BIOS
setup.
Boot ROM item to [Enabled].
3. Press <F10> to save the changes and exit.
4. Reboot your computer.
5. During POST. press <Ctrl+A>
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
®
OS after you have
installed the Serial ATA RAID driver. See section 3.2.4 Make Disk menu for
details.