Filter
Top Products
ASUS M2V
5-15
8. If you select <Y> the utility will duplicate your data. Press <Y> anytime
if you want to exit the duplication process.
3. From this point, you can auto-congure the RAID array by selecting
Auto Setup for Data Security or manually congure the RAID array
for mirrored sets. If you want to auto-congure, proceed to the next
step, otherwise, skip to step 6.
4. Select Auto Setup for Data Security and press <Enter>. The
following conrmation message appears.
The data on the selected disks will
be destroyed. Continue? (Y/N)
10. Press <Y> to conrm or <N> to return to the conguration options.
11. Press <Esc> to go back to main menu.
Auto create array will destroy all
data on disks, Continue? (Y/N)
5. Press <Y> to conrm or <N> to return to the conguration options. If
you selected <Y>, proceed to step 11.
6. Select Select Disk Drives, then press <Enter>. Use arrow keys to
select disk drive/s, then press <Enter>. An asterisk appears before a
selected drive.
7. Select Start Create Process and press <Enter> to setup hard disk for
RAID system. The following inquiry appears:
Save the data on source disk to
mirror after creation? (Y/N)
Duplicating...
RAID 1 for data protection
Press Yes(Y) to Escape
9. If you select <N>, the following conrmation message appears.