Asus M2V Computer Hardware User Manual


 
4-26
Chapter 4: BIOS Setup
4.5.5 APM Conguration
APM Conguration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By External Modems [Disabled]
Power On By Lan [Disabled]
Power On By PCI Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Alarm [Disabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Conguration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off ]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power
loss. When set to Last State, the system goes into either off or on
state whatever the system state before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power On By External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is
in Soft-off mode. Conguration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on
the rst try. Turning an external modem off and then back on while
the computer is off causes an initialization string that turns the system
power on.
Power On By Lan [Disabled]
Allows you to enable or disable the LAN-wake up feature.
Conguration options: [Disabled] [Enabled]