Filter
Top Products
ASUS P2L97A User’s Manual 47
IV. BIOS SOFTWARE
IV. BIOS
Plug & Play / PCI
DMA x Used By ISA (No/ICU)
These fields indicate whether or not the displayed DMA channel for each field is
being used by a legacy (non-PnP) ISA card. Available options include: No/ICU and
Yes. The first option, the default setting, indicates either that the displayed DMA
channel is not used or an ICU is being used to determine if an ISA card is using that
channel. If you install a legacy ISA card that requires a unique DMA channel, and
you are not using an ICU, you must set the field for that channel to Yes.
ISA MEM Block BASE (No/ICU)
This field allows you to set the base address and block size of a legacy ISA card that
uses any memory segment within the C800H and DFFFH address range. If you
have such a card, and you are not using an ICU to specify its address range, select a
base address from the six available options; the ISA MEM Block SIZE field will
then appear for selecting the block size. If you have more than one legacy ISA card
in your system that requires to use this address range, you can increase the block
size to either 8K, 16K, 36K, or 64K. If you are using an ICU to accomplish this task,
leave ISA MEM Block BASE to its default setting of No/ICU.
SYMBIOS SCSI BIOS (Auto)
The default uses Auto settings for the onboard SCSI BIOS. If you do want to use the
onboard SCSI BIOS, choose Disabled.
USB IRQ (Enabled)
When USB devices are connected to the onboard Universal Serial Bus (USB) con-
nector, the resource settings or IRQs for these devices are, by default, automatically
assigned by the BIOS. The option allows you to enable or disable the function.
Leave on Enabled to use the onboard USB connector.