ASUS P4BGL-MX Motherboard
1-15
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
7. Internal audio connectors (4-pin AUX1, CD1)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, or MPEG card.
6. CPU and Chassis Fan Connectors
(3-pin CPUFAN1, CHASFAN1)
The two fan connectors support cooling fans of 350mA (4.2 Watts) or
a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins
allow air flow to go across the onboard heat sinks instead of the
expansion slots. The fan wiring and plug may vary depending on the
fan manufacturer. Connect the fan cable to the connector matching
the black wire to the ground pin.
P4BGL-MX
P4BGL-MX 12-Volt Cooling Fan Power
CPUFAN1
CHASFAN
1
GND
Rotation
+12V
GND
Rotation
+12V
P4BGL-MX
P4BGL-MX Internal Audio Connectors
CD1(Black) AUX1(White
)
Right Audio Channel
Left Audio Channel
Ground
Ground
Right Audio Channel
Left Audio Channel
Ground
Ground