![](http://pdfasset.owneriq.net/4/6f/46f3a252-430a-4951-b5d6-8ff0806495f2/46f3a252-430a-4951-b5d6-8ff0806495f2-bg33.png)
ASUS P5N7A-VM 1-39
ASUS Q-Connector (system panel)
You can use the ASUS Q-Connector to connect/disconnect chassis front panel
cables in a few steps. Refer to the instructions below to install the ASUS
Q-Connector.
1. Connect the front panel cables to the
ASUS Q-Connector.
Refer to the labels on the Q-Connector
to know the detailed pin denitions, then
match them to the respective front panel
cable labels.
2. Install the ASUS Q-Connector to the
system panel connector, ensuring the
orientation matches the labels on the
motherboard.
Enable the front panel functions.
The gure shows the Q-Connector properly
installed on the motherboard.