Filter
Top Products
3-20 Chapter 3: Software support
3.4 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing Windows
®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1. Place the motherboard support CD into the CD-ROM drive.
2. When the Drivers menu appears, click Make VIA VT8251 32/64bit
RAID Driver Disk to create a VIA RAID driver disk
Or
Browse the contents of the support CD to locate the driver disk utility
and go to \Drivers\Chipset\EIA 4 in 1\Disk for the VIA RAID
driver disk utility
3 Insert oppy disk to oppy disk drive.
5. Follow succeeding screen information to complete process.
6. Write-protect the oppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6
key to install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy
disk drive.
3. Follow the succeeding screen instructions to complete the installation.
Refer to section “3.2.2 Drivers menu” for details.