ASUS P5VD2-MX/P5V-VM DHASUS P5VD2-MX/P5V-VM DH
ASUS P5VD2-MX/P5V-VM DHASUS P5VD2-MX/P5V-VM DH
ASUS P5VD2-MX/P5V-VM DH
2-232-23
2-232-23
2-23
VGA Share Memory Size [64M]VGA Share Memory Size [64M]
VGA Share Memory Size [64M]VGA Share Memory Size [64M]
VGA Share Memory Size [64M]
Configuration options: [Disabled] [16M] [32M] [64M]
Primary Display Adapter [PCI-E]Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]Primary Display Adapter [PCI-E]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot
device.
Configuration options: [PCI] [AGP] [PCI-E]
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play
capable operating system
Select No if you need the
BIOS to configure non-boot
devices
PCIPnP
Plug & Play O/S [No]
Resources Controlled By [Auto]
x IRQ Resources
Assign IRQ For VGA [Enabled]
** PCI Express relative itmes **
Maximum Payload Size [4096]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
2.4.32.4.3
2.4.32.4.3
2.4.3
PCIPnPPCIPnP
PCIPnPPCIPnP
PCIPnP
Plug & Play O/S [No]Plug & Play O/S [No]
Plug & Play O/S [No]Plug & Play O/S [No]
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When
set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot. Configuration options: [No] [Yes]
Resources Controlled By [Auto]Resources Controlled By [Auto]
Resources Controlled By [Auto]Resources Controlled By [Auto]
Resources Controlled By [Auto]
When set to [Auto], the BIOS automatically configures all the boot and
Plug and Play compatible devices. Set to [Manual] if you want to assign the
IRQ DMA and memory base address fields.
Configuration options: [Auto] [Manual]
When the item Resources Controlled By is set to [Auto], the item IRQ
Resources is grayed out and not user-configurable. Refer to the section
“IRQ Resources” for information on how to enable this item.