Filter
Top Products
4-304-30
4-304-30
4-30
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
LAN Option ROM [Disabled]
This item allows you to enable or disable the option ROM in the
onboard LAN controller. This item appears only when the
OnboardOnboard
OnboardOnboard
Onboard
PCI LAN PCI LAN
PCI LAN PCI LAN
PCI LAN item is set to Enabled. Configuration options: [Disabled]
[Enabled]
Silicon 3132 Controller [SATA2 Mode]Silicon 3132 Controller [SATA2 Mode]
Silicon 3132 Controller [SATA2 Mode]Silicon 3132 Controller [SATA2 Mode]
Silicon 3132 Controller [SATA2 Mode]
Allows you to set the mode at which the onboard Silicon Image 3132 Serial
ATA controller will operate. Set this item to [SATA2 Mode] to enable
hot-plug function for the external device. Configuration options: [Disabled]
[SATA2 Mode] [RAID Mode]
ITE8211F Controller [Enabled]ITE8211F Controller [Enabled]
ITE8211F Controller [Enabled]ITE8211F Controller [Enabled]
ITE8211F Controller [Enabled]
Allows you to enable or disable the the onboard ITE
®
8211F IDE controller.
Configuration options: [Disabled] [Enabled]
Detecting Device Time [Quick Mode]
Sets the time the ITE8211F IDE controller detects devices connected
to the IDE connectors. This item appears only when the
ITE8211FITE8211F
ITE8211FITE8211F
ITE8211F
Controller Controller
Controller Controller
Controller is set to [Enabled]. Configuration options: [Standard
Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]Serial Port1 Address [3F8/IRQ4]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]Parallel Port Address [378]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]Parallel Port Mode [ECP]
Parallel Port Mode [ECP]Parallel Port Mode [ECP]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]ECP Mode DMA Channel [DMA3]
ECP Mode DMA Channel [DMA3]ECP Mode DMA Channel [DMA3]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]