Filter
Top Products
4-22 Chapter 4: BIOS setup
FSB Termination Voltage [Auto]
Allows you to select the front side bus termination voltage.
Conguration options: [Auto] [1.20V] [1.30V] [1.40V] [1.50V]
Setting a high FSB termination voltage may damage the chipset and
CPU.
MCH Chipset Voltage [Auto]
Allows you to select the chipset voltage of the memory controller hub
(MCH). Conguration options: [Auto] [1.50V] [1.60V] [1.70V] [1.80V]
Setting a high MCH chipset voltage may damage the chipset!
ICH Chipset Voltage [Auto]
Allows you to select the chipset voltage of the I/O controller hub (ICH).
Conguration options: [Auto] [1.05V] [1.20V]
Setting a high ICH chipset voltage may damage the chipset!
The following item appears only when the AI Overclocking item is set to
[Overclock Prole].
Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset values.
Conguration options: [Overclock 5%] [FSB888/DDR2-667]
[Overclock 10%] [FSB960/DDR2-800]
[Overclock 15%] [FSB1200/DDR2-800]
[Overclock 20%] [FSB1280/DDR2-800]
[Overclock 30%] [FSB1333/DDR2-667]
[FSB1333/DDR2-834]
The following item appears only when the AI Overclocking item is set to
[AI NOS].
NOS Mode [Auto]
Sets the Non-Delay Overclocking System mode. Select either of the
following conguration options:
Auto - loads the optimum sensitivity and overclocking percentage
setting.
Manual - allows you to manually set overclocking congurations.