Filter
Top Products
5-50 Chapter 5: RAID conguration
5.4.5 Viewing SAS topology
1. From the Adapter Properties screen, select SAS Topology, then press
<Enter>.
You may press <Alt+D> to display device properties, or <Alt+M> to display
more keys.
2. Information about the volume and its member-disks are then displayed.
Esc = Exit F1/Shift+1 = Help
Alt+D = Device Properties Alt+M = More Keys
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
SAS Topology -- SAS2008
Device Identier Device
SAS 2008(01:00) Info
﹂ Controller Direct Attach Devices Controller
﹂ RAID1 VOL LSI Logical Volume 3000
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
SAS Topology -- SAS2008
More keys for the SAS Topology display:
Alt+B = Select or deselect a device as the preferred boot device
Alt+A = Select or deselect a device as the alternate boot device
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
Adapter Properties -- SAS2008
Adapter SAS 2008
PCI Slot 00
PCI Address(Bus/Dev) 01:00
MPT Firmware Revision 8.00.00.00-IR
SAS Address 500E0180:00010424
NVDATA Version 07.01
Status Enabled
Boot Order 0
Boot Support [Enabled BIOS & OS]
RAID Properties
SAS Topology
Advanced Adapter Properties