Filter
Top Products
ASUS P8B-C series 5-3
5.1 Setting up RAID
The motherboard supports the following SATA RAID solutions:
•
(
P8B-C/4L
only) with
RAID 0, RAID 1, and RAID 10 support (for both Linux and Windows OS).
•
Intel Rapid Storage Technology
with RAID 0, RAID 1, RAID 10, and RAID 5
support (for Windows OS only).
•
LSI Corporation MPT Setup Utility
(
P8B-C/SAS/2L,
P8B-C/SAS/4L
only)
with RAID 0, RAID 1, RAID 1E, and RAID 10 support.
RAID 0
(Data striping)
optimizes two identical hard disk drives to read and write
data in parallel, interleaved stacks. Two hard disks perform the same work as a
single drive but at a sustained data transfer rate, double that of a single disk alone,
thus improving data access and storage. Use of two new identical hard disk drives
is required for this setup.
RAID 1
(Data mirroring)
copies and maintains an identical image of data from one
drive to a second drive. If one drive fails, the disk array management software
directs all applications to the surviving drive as it contains a complete copy of
the data in the other drive. This RAID conguration provides data protection and
increases fault tolerance to the entire system. Use two new drives or use an
existing drive and a new drive for this setup. The new drive must be of the same
size or larger than the existing drive.
RAID 1E
(Enhanced RAID 1)
has a striped layout with each stripe unit having a
secondary (or alternate) copy stored on a different disk. You can use three or more
hard disk drives for this conguration.
RAID 10
is data striping and data mirroring combined without parity (redundancy
data) having to be calculated and written. With the RAID 10 conguration you get
all the benets of both RAID 0 and RAID 1 congurations. Use four new hard disk
drives or use an existing drive and three new drives for this setup.
RAID 5
stripes both data and parity information across three or more hard disk
drives. Among the advantages of RAID 5 conguration include better HDD
performance, fault tolerance, and higher storage capacity. The RAID 5 conguration
is best suited for transaction processing, relational database applications,
enterprise resource planning, and other business systems. Use a minimum of three
identical hard disk drives for this setup.
• If you want to boot the system from a hard disk drive included in a created
RAID set, copy rst the RAID driver from the support DVD to a oppy disk
before you install an operating system to the selected hard disk drive.
• Please refer to chapter 2 for how to select the RAID conguration utility.
Move the jumper to choose between LSI MegaRAID and Intel
®
Rapid RAID.