Filter
Top Products
2-6
Chapter 2: Hardware information
Chapter 2
Memory congurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the
DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel conguration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• According to Intel CPU specications, DIMM voltage below 1.65V is recommended to
protect the CPU.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or
more memory on the motherboard, the actual usable memory for the OS is about 3GB
or less. For effective use of memory, we recommend that you do any of the following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft
®
support site at
http://support.microsoft.com/kb/929605/en-us.
• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
frequency or at a higher frequency, refer to section
3.4 Ai Tweaker menu
for manual
memory frequency adjustment.
• For system stability, use a more efcient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Visit the ASUS website www.asus.com for latest QVL.
P8H77-M PRO Motherboard Qualied Vendors Lists (QVL)
DDR3 2400 MHz capability
Vendors Part No. Size SS/
DS
Chip
Brand
Chip NO. Timing Voltage DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
CORSAIR CMGTX8(XMP) 8GB (2GBx4) SS - - 10-12-10-27 1.65V • • •
G.SKILL F3-19200CL11Q-16GBZHD(XMP) 16GB
(4x4GB)
DS - - 11-11-11-31 1.65V • •
G.SKILL F3-19200CL9D-4GBPIS(XMP) 4GB (2x2GB) DS - - 9-11-9-28 1.65V • • •
GEIL GET34GB2400C9DC(XMP) 2GB DS - - 9-11-9-27 1.65V • • •
KINGMAX FLLE88F-C8KKAA HAIS(XMP) 2GB SS - - 10-11-10-30 1.8V • • •
Transcend TX2400KLU-4GK(427652)(XMP) 4GB (2x2GB) SS - - - 1.65V • • •
Transcend TX2400KLU-4GK (381850)(XMP) 4GB (2x2GB) SS - - 9 1.65V • • •
Transcend TX2400KLU-4GK(374243)(XMP) 4GB (2x2GB) DS - - 9 1.65V • • •
PATRIOT PVV34G2400C9K(XMP) 4GB (2x2GB) DS - - 9-11-9-27 1.65V • •