Filter
Top Products
3-24
Chapter 3: BIOS setup
Chapter 3
3.6 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
UEFI BIOS Utility - Advanced Mode
Scroll down to display the following items:
CPU Temperature +34ºC / +93ºF
MB Temperature +31ºC / +87ºF
CPU Fan Speed 1717 RPM
Chassis Fan 1 Speed N/A
Chassis Fan 2 Speed N/A
Power Fan Speed N/A
CPU Voltage +1.185V
3.3V Voltage +3.312V
5V Voltage +5.080V
12V Voltage +12.192V
CPU Q-Fan Control Enabled
CPU Fan Speed Low Limit 200 RPM
CPU Fan Prole Standard
3.5.8 Network Stack
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Allow BIOS yo switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
other PME options will be switched
off.
Back Advanced\ Network Stack >
UEFI BIOS Utility - Advanced Mode
Network Stack Disabl Link
Network Stack [Disable Link]
Enables or disables the network stack (Pxe and UEFI). Conguration options: [Disable Link]
[Enable]
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chassis Q-Fan Control Enabled
Chassis Fan Speed Low Limit 600 RPM
Chassis Fan Prole Standard
Anti Surge Support Enabled