Asus P8Z77 WS Computer Hardware User Manual


 
ASUS P8Z77 WS 5-5
Chapter 5
6. Connect a VGA or a DVI cable to the graphics card.
Goldngers
SLI bridge
5.2.3 Installing three SLI-ready graphics cards
3-Way SLI bridge
1. Prepare three SLI-ready graphics cards.
2. Insert the three graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and rmly insert the 3-Way SLI
bridge connector to the goldngers on
each graphics card. Ensure that the
connector is rmly in place.
5. Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.