Filter
Top Products
24 P/E-P55T2P4D User’s Manual
III. INSTALLATION
7. Board Power Input (12-pin block)
This connector connects to a standard 5 Volt power supply. To connect the
leads from the power supply, ensure first that the power supply is not plugged.
Most power supplies provide two plugs (P8 and P9), each containing six wires,
two of which are black. Orient the connectors so that the black wires are
located in the middle.
Using a slight angle, align the plastic guide pins on the lead to their receptacles
on the connector. Once aligned, press the lead onto the connector until the
lead locks into place.
Power Connector on Motherboard
P9
P8
RED
RED
RED
WHT
BLK
BLK
BLK
BLK
BLU
YLW
RED
ORG
Power Plugs from Power Supply
-5V
GND
+12V
-12V
+5V
+5V
PG
8. IDE activity LED
This connector connects to the hard disk activity indicator light on the case.
IDE (Hard Drive) LED
+
(Connectors)
III. INSTALLATION