Filter
Top Products
P/E-P55T2P4D User’s Manual 49
IV. BIOS SOFTWARE
1. Save Current BIOS to File
This option allows you to copy the contents of the Flash memory chip into a file in
the \FLASH directory. This gives you a backup copy of the original motherboard
BIOS in case you need to re-install it. In such cases where the data on the chip get
lost or corrupted, you can reprogram the chip using this backup copy. We strongly
recommend that you perform this procedure.
2. Update BIOS Main Block from File
This option updates the BIOS from a file on the disk. This can either be a new file or
a backup file created by the “Save Current BIOS to File” option. This will not
update the Boot Block if the Boot Block is different. You will be prompted with the
following if advanced features if necessary.
Boot Block of New BIOS is different from old one !!!
Please Use 'Advanced Feature' to flash whole bios !!!
3. Advanced Features
Selecting this option brings up the Advanced Features screen for clearing the PnP
configuration record and updating the motherboard BIOS.
To terminate the program and return to the DOS prompt, press the <Esc> key. Se-
lecting the third option displays the Advanced Features screen.
Clear PNP ESCD Parameter Block
This option erases the Plug-and-Play (PnP) configuration record.
Update BIOS Including Boot Block and ESCD
This option updates the Boot Block, the motherboard BIOS and the PnP ESCD
Parameter Block from a new BIOS file in the \FLASH directory.
Advanced Features
Flash Type -- SST 29EE010
Current BIOS Revision: #401A0-0103
Choose one of the following:
1. Clear PNP ESCD Parameter Block
2. Update BIOS Including Boot Block and ESCD
Enter Choice: [2]
Press ESC To Exit
IV. BIOS
(Flash Memory Writer)