Filter
Top Products
BIOS SPECIFICATION
6-16
G.0 A FA16 To FLASH I/F
G.1 A FA17 To FLASH I/F
G.2 A FA18 To FLASH I/F
G.3 NC
G.4 O THRM_CPU# Low THRM_CPU# signal from external thermal
sensor
G.5 NC
G.6 I PMTHERM# Low PMTHERM# signal to ICH7-M
G.7 NC
H.0 O VSUS_ON Low VSUS_ON signal to power circuit
H.1 I VSUS_GD# VSUS_GD# signal from power circuit
H.2 I IMVPOK# IMVPOK# signal from power circuit
H.3 O PM_PWRBTN# High PM_PWRBTN# signal to ICH7-M
H.4 O SUSC_EC# Low SUSC_EC# signal to ICH7-M
H.5 O SUSB_EC# Low SUSB_EC# signal to ICH7-M
H.6 O CPU_VRON Low CPU_VRON signal to power circuit
H.7 O PM_RSMRST# Low At boot, KBCRSM needs to be set low for
normal operation
I.0 O ICH_PWROK Low ICH_PWROK signal to ICH7-M
I.1 O VSUS_ON High VSUS_ON signal to power circuit
I.2 O BAT1_CNT2# Low BAT1_CNT1# signal to battery
I.3 O CHG_EN# High For Battery Charge function
I.4 O PRECHG Low For Batter PreCharge function
I.5 O BAT_LL Low When the pin is set as low, it represents that
battery is in very low capacity.
I.6 O BAT_LEARN Low This pin is used for battery learning (refresh).
To set it low for battery charging. To set it
high for battery discharging.
1. Name field: NC -> not connected