Asus Vintage-PE2 Network Card User Manual


 
4-104-10
4-104-10
4-10
Chapter 4: Motherboard informationChapter 4: Motherboard information
Chapter 4: Motherboard informationChapter 4: Motherboard information
Chapter 4: Motherboard information
Power LED Lead (2-pin PLED)Power LED Lead (2-pin PLED)
Power LED Lead (2-pin PLED)Power LED Lead (2-pin PLED)
Power LED Lead (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the 2-pin
power LED cable from the system chassis to this connector. The LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
System warning speaker (Orange 4-pin SPEAKER)System warning speaker (Orange 4-pin SPEAKER)
System warning speaker (Orange 4-pin SPEAKER)System warning speaker (Orange 4-pin SPEAKER)
System warning speaker (Orange 4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
Hard disk drive activity LED (2-pin IDE_LED)Hard disk drive activity LED (2-pin IDE_LED)
Hard disk drive activity LED (2-pin IDE_LED)Hard disk drive activity LED (2-pin IDE_LED)
Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)Reset button (2-pin RESET)
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
ATX power button/soft-off button (2-pin PWRSW)ATX power button/soft-off button (2-pin PWRSW)
ATX power button/soft-off button (2-pin PWRSW)ATX power button/soft-off button (2-pin PWRSW)
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
9.9.
9.9.
9.
System panel connector (20-pin PANEL)System panel connector (20-pin PANEL)
System panel connector (20-pin PANEL)System panel connector (20-pin PANEL)
System panel connector (20-pin PANEL)
This connector supports several chassis-mounted functions.
®
System panel connector
PANEL
PLED-
+5V
Speaker
SPEAKER
PLED
Ground
Reset
Reset
Ground
Ground
PLED+
IDE_LED-
IDE_LED+
IDE_LED
Ground
PWR
PWR