Filter
Top Products
Alternate Hotkey Invocation Keys
An alternate set of Hotkey Invocation keys is provided in case the default set
conflicts with programs running on the computers.
To switch to the alternate Hotkey Invocation set, do the following:
1. Invoke HKM (see p. 12)
2. Press and release the H key
The Hotkey Invocation keys become the Ctrl key (instead of Num Lock) and the
F12 key (instead of minus). At the same time, the Skip Mode activation method
changes from tapping the Scroll Lock key twice to tapping the Ctrl key twice
([Ctrl] [Ctrl]).
You automatically exit HKM following this procedure.
Note: This hotkey is a toggle between the two invocaton methods. To revert
back to the original Hotkey Invocation methods, invoke HKM with the
[Ctrl] and [F12] keys, then press and release the H key. The Hotkey
Invocation keys revert back to [Num Lock] and [-] , and the Skip Mode
activation method reverts back to [Scroll Lock] [Scroll Lock].
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the
following:
1. Invoke HKM (see p. 12).
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays Beeper On or
Beeper Off for one second; then the message disappears and you automatically
exit Hotkey Mode.
2003-07-17
CS-1732 / CS-1734 User Manual 15