ATEN Technology CS-1732 Switch User Manual


 
CS-1734 Front View
1. Port Selection Switches
M Press a switch to access the computer attached to its corresponding port.
M Pressing Buttons 1 and 2 simultaneously for 2 seconds performs a
keyboard and mouse reset.
M Pressing Buttons 3 and 4 simultaneously for 2 seconds starts Auto Scan
Mode. See p. 14 for details.
2. Port LEDs
The Port LEDs are built into the Port Selection Switches. The upper ones are
the KVM Port LEDs; the lower ones are the USB LEDs:
KVM:
M Lights DIM ORANGE to indicate that the computer attached to the
corresponding port is up and running (On Line).
M Changes to BRIGHT ORANGE to indicate that the computer at-
tached to its corresponding port is the one that has the KVM focus
(Selected).
M Flashes to indicate that the computer attached to its corresponding
port is being accessed under Auto Scan mode.
USB: Lights to indicate that the computer attached to its corresponding port
is the one that has access to the USB peripherals.
3. USB Ports
Your USB keyboard and USB mouse plug in here.
1&2
3
2003-07-17
CS-1732 / CS-1734 User Manual 5