Filter
Top Products
CE680 / CE690 User Manual
10
Installation
Setting up the CE680 / CE690 DVI Optical KVM Extender system is simply a
matter of plugging in the cables. Make sure that all the equipment to be
connected up is powered off. Refer to the installation diagrams (the numbers in
the diagrams correspond to the steps), and do the following:
KVM Function
Steps 1–6 are the primary steps for installing your CE680 / CE690, and
utilizing the basic KVM functions.
1. Using the Custom KVM cable supplied with this unit, plug the connectors
into their appropriate ports on the front panel of the Local Unit (CE680L /
CE690L).
2. Plug the connectors on the other end of the Custom KVM cable into the
appropriate ports on the local computer. Each connector is marked with an
appropriate icon to indicate which it is.
Note: If you are combining the CE680 / CE690 with a KVM switch, the
other end of the DVI KVM cable plugs into the appropriate ports on
the KVM switch.
3. Using a Fiber Optic cable (LC, Single Mode), connect the Local and
Remote units via the CE680L (Brown) / CE680R (Yellow) / CE690L
(Purple) / CE690R (White) Optical In/Out ports.
4. Connect the local console devices (mouse, keyboard, monitor, speakers,
microphone) into the appropriate ports on the rear panel of the CE680L /
CE690L.
5. Connect the remote console devices (mouse, keyboard, monitor, speakers,
microphone) into the appropriate ports on the rear panel of the CE680R /
CE690R.
6. Plug each of the power adapters (supplied with this package) to a power
source; plug the other ends into the CE680L / CE690L and CE680R /
CE690R Power Jack.