Filter
Top Products
CE680 / CE690 User Manual
16
Mode Selection
The Operating Mode Selection switch, located on each unit’s front panel,
controls the operating mode of the DVI Optical KVM Extender system.
Pressing the switch toggles the operating mode as follows:
When the system is in Local Mode, the Remote unit’s selection switch is
inactive. Pressing it has no effect – the Remote operator cannot take over
control. The Remote selection switch only becomes active after the Local
selection switch is pressed to put the system back into Auto Mode.
Likewise, if the system is in Remote Mode, the Local unit’s selection switch
is inactive – the Local operator cannot take over control. The Local selection
switch only becomes active after the Remote selection switch is pressed to put
the system back into Auto Mode.
Switch Action
Local (CE680L /
CE690L) Operation
Mode Pushbutton
Toggles between Auto and Local. In Local Mode, only the
local console has keyboard and mouse access and control of
the computer (or computers via KVM switch).
Remote (CE680R /
CE690R) Operation
Mode Pushbutton
Toggles between Auto and Remote. In Remote Mode, only
the remote console has keyboard and mouse access and
control of the computer (or computers via KVM switch).
CE680L / CE690L
CE680R / CE690R