Filter
Top Products
Chapter 2. Hardware Setup
13
To rack mount the KL1100, do the following:
1. While one person positions the KL1100 in the rack and holds it in place,
the second person loosely screws the front brackets to the rack.
2. While the first person still holds the KL1100 in place, the second person
slides the L brackets into the KL1100's side mounting brackets from the
rear until the bracket flanges contact the rack, then screws the L brackets
to the rack.
3. After the L brackets have been secured, tighten the front bracket screws.
Note: Allow at least 5.1 cm on each side for proper ventilation, and at least
12.7 cm at the back for the power cord and cable clearance.