Filter
Top Products
KL1100 User Manual
26
Firmware Upgrade Mode
The KL1100’s firmware upgrade mode can be accessed one of two ways: by
entering a hotkey sequence (see Console Selection, page 24), or by placing the
KL1100 in firmware upgrade recovery mode (see Firmware Upgrade
Recovery, page 31).
Note: In order to activate the Firmware Upgrade Mode using a hotkey
sequence, the Firmware Upgrade Recovery Switch (see page 7) must be
set to the Normal position.
1. Turn off the power to the KL1100 using the power switch located on the
back side of the console.
2. Slide the firmware switch to RECOVER (see page 7).
3. Turn on the power to the KL1100 using the power switch located on the
back side of the console.
When the KL1100 is in Firmware Upgrade Mode, the Num Lock, Caps Lock
and Scroll Lock LEDs will continually flash on and off.
To exit the Firmware Upgrade Mode, see Exiting Firmware Upgrade Mode,
page 31.