Filter
Top Products
COPYING A DOCUMENT
1. Make
sure the unit is ON. If not, turn ON the Power Switch.
Note: The Document Feeder can accept only one page at a time.
2. Place the document
FACE DOWN into the loading slot. The unit will grip the paper.
3. Set the Slide Switch
to NORMAL.
4. If you want a higher
quality copy, set the Slide Switch to FINE.
5. If copying a photograph, set the Slide Switch to PHOTO.
6. Press the START key,
Your machine
will
begin to copy the original loaded in the document feeder.
7. After one page is copied, a four-second beep will sound.
While the unit beeps, you can insert another page to copy.
Your unit will return to the Standby mode, when the last page is copied.
Note: If document jamming occurs, the unit sounds a warning tone. (See page 31.)
Slide Switch