FUNCTION MODE.
This mode is used to set the functions listed below:
l
FEATURE
SET-UP
. REPORTS
l
TESTING THE MACHINE
if you want to enter a Function Mode from The Standby Mode, press and hold down the START key
about 4 seconds until the machine beeps. All of the LED lights will light. Make sure there are no
documents loaded to send when setting these functions.
FEATURE SET UP
This section describes the procedures used to set up the features of your facsimile machine.
The features include:
TSI/CSI
ID Number (your fax telephone number)
Sender ID (for example, your company name)
User Options Entry
Long Documents Yes/No
Terminal ID Print Message Yes/No
Terminal ID Print location
Receive Terminal Identification Yes/No
Group 2 T
X
Mode
Print Message Confirmation Yes/No
Auto Print Reports Yes/No
Ring Response Set
19