Filter
Top Products
Controls and Indicators
FRONT VIEW
1. TELEPHONE HANDSET
2 MEMORY KEY
Used to store telephone numbers for AUTO-DIAL. The machine can store a maximum of 18 digits
each number.
3. P/T SWITCH
A two-position switch for selection of tone or pulse dialing.
4. VOLUME
for
5.
6.
7.
6.
9.
10.
11.
12.
13.
14.
A three-position switch used to control the loudness of the ringer tone.
HOOK SWITCH
KEY-PAD
RECALL KEY
This key activates the AUTO-DIAL. use the KEY PAD to enter stored numbers.
PAUSE KEY
If your telephone is connected to a switchboard you may have to dial a digit to access an outside or
long distance telephone line. This usually requires a variable wait for a second dial tone
REDIAL
KEY
This key is used to redial the last number you dialed.
TELEPHONE CABLE CONNECTOR (LINE)
A standard telephone jack connects the unit to the telephone line.
HANDSET JACK (TEL)
CONTROL PANEL
RECEIVING PAPER COVER
PAPERCOVERRELEASE
Press to release the paper cover. Lift the cover to access the Paper compartment. When closing use
BOTH hands to push the cover down firmly with equal pressure on both sides of the cover to avoid
twisting it. It will “click”, when closed.
8