![](http://pdfasset.owneriq.net/0/5c/05c34016-41dd-4b7c-9ad7-086399a4b8ff/05c34016-41dd-4b7c-9ad7-086399a4b8ff-bg8d.png)
Document No. 10-300077, Issue 2 4-29
Security
■ To set the IP address used as the source IP address for Access-
Request messages,
(configure)# set radius authentication
source-ip <ip-addr>
■ To set whether the switch recognizes only Access-Accept messages
that have the correct group name included,
(configure)# set
radius authentication switch-service-type-required [{enabled |
disabled}]
■ To set the UDP port number to use for RADIUS authentication,
(configure)# set radius authentication udp-port <1812-or-
1645>