Filter
Top Products
5-16 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 5
Adding a User to a Group
To add an SNMPv3 user to a group, use the following CLI command:
(configure)# snmp-server user <username> group <groupname>
Table 5-7. snmp-server user Command
Parameter Definition
<username> User name for the SNMPv3 user. The user name can
range from 1 to 32 alphanumeric characters.
Important: Do not assign a community string and
SNMPv3 user the same name.
<groupname> Name of the group to which you are assigning the
user.
localized Use this keyword if you want to enter the
authentication password and privacy password in
their localized form instead of text.
Localized passwords consist of the engine ID plus the
password and are then hashed by either HMAC-SHA
or HMAC-MD5.
sha Authenticates the user by means of HMAC-SHA.
md5 Authenticates the user by means of HMAC-MD5.
<auth-password> The authentication password for the user:
• Text passwords can range from 8 to 64
characters.
• Localized HMAC-SHA-hashed passwords must
be 20 bytes.
• Localized HMAC-MD5-hashed passwords
must be 16 bytes.
Enter all localized passwords in the format of
nn:nn:nn....
<priv-password> The encryption password for the user.
• Text passwords can range from 8 to 64
characters.
• Localized, HMAC-SHA- or HMAC-MD5-
hashed encryption passwords must be 16 bytes.
Enter all localized passwords in the format of
nn:nn:nn....