Filter
Top Products
Chapter 3 Configuration
2. Enter the new address and press Enter. If you enter “0” as the new address, the
procedure will use the ILMI, WKA or PVC in that order, as explained at the
top of the page.
3. Press Enter to return to the LECS ATM address menu.
4. Reset the module for the changes to take effect (press 0 to return to Main Menu
and then 1 to Reset).
Enter a specific address only for an ATM switch that does not support ILMI
protocol or P.V.C.’s and its LECS address is not Well-Known Address (WKA).
12 (9) – ELAN Configuration
This option allows you to display ELAN/VLAN associations and display and
change the default ELAN name. To access the ELAN configuration menu select
ELAN configuration:
ELAN Configuration menu
Visage 16155(R) S/W Version: ____ Slot #: ____
<CR> Refresh the screen
0. Return to Previous Menu
-----------------------------------
1. Display ELAN/VLAN associations
2. Display default ELAN information
-----------------------------------
3. Change default ELAN name
>>>Enter your choice:
P117F(R) Stackable Switch Installation Guide 35