Filter
Top Products
Chapter 3 Configuration
13 (10) – ATM Redundancy
This menu only appears for the P117FR, which has a redundant ATM port.
This menu enables and disables the redundancy mechanism. Redundancy can be
Enabled or Disabled, and the Active port can be either the Upper or the Lower
port.
ATM Redundancy menu
S/W Version: _______ Slot #: 1
<CR> Refresh the screen
0. Return to Previous Menu
-----------------------------------------
1. Display Current redundancy parameters
2. Display Default redundancy parameters
-----------------------------------------
3. Set redundancy parameters to their default values
-----------------------------------------
4. Change redundancy mode
>>>Enter your choice:
• To display Current Redundancy Parameters, select 1.
• To display Default redundancy parameters, select 2.
• To set redundancy parameters to their default values, select 3.
You must Reset the module after changing to the default values.
• To change redundancy mode, select 4.
38 P117F(R) Stackable Switch Installation Guide