Filter
Top Products
Chapter 12 Avaya P330 Layer 3 Features
102 Avaya P333R-LB User’s Guide
Route Redistribution
Route redistribution is the interaction of multiple routing protocols. OSPF and RIP
can be operated concurrently in the P330. In this case, the P330 can be configured to
redistribute routes learned from one protocol into the domain of the other routing
protocol. Similarly, static routes may be redistributed to RIP and to OSPF. Route
redistribution involves metric changes and sometimes causes routing loops in the
presence of other routes with incompatible schemes for route redistribution and
route preferences. Be careful!
The the P330 scheme for metric translation in route redistribution is as follows:
• Static to RIP metric configurable (default 1)
• OSPF internal metric N to RIP metric 1
• OSPF external type 1 metric N to RIP metric 1
• OSPF external type 2 metric N to RIP metric N+1
• Static to OSPF external type 2, metric configurable (default 1)
• RIP metric N to OSPF external type 2, metric N
• Direct to OSPF external type 2, metric 1.
By default, the P330 does not redistribute routes between OSPF and RIP.
Redistribution from one protocol to the other can be configured. By default, static
routes are not redistributed to RIP and OSPF. The P330 allows the user to globally
enable redistribution of static routes to RIP, and separately, to globally enable
redistribution of static routes to OSPF. In addition, the P330 lets the user configure,
on a per static route basis, whether the route is to be redistributed to RIP and OSPF,
and what metric (in the range of 1-15). The default state is to enable the route to be
redistributed at metric 1. When static routes are redistributed to OSPF, they are
always redistributed as external type 2.
Route Redistribution Commands
In order to... Use the following command...
Redistribute routing information
from other protocols
redistribute