Filter
Top Products
Chapter 14 Load Balancing in the P333R-LB
32 Avaya P333R-LB User’s Guide
Full NAT Based Configuration
Note: The following example uses sample IP addresses for illustration only.
Figure 14.9 illustrates a Full NAT based SLB configuration.
Figure 14.9 Full NAT Based SLB Configuration Example
Figure 14.9 illustrates a sample configuration where two clients are connected to a
P333R-LB which balances the traffic between three Real Servers. In addition to the
traffic path through the P333R-LB, a direct path exists between the Clients and the
Real Servers through another router. The P333R-LB is configured with a VIP of
193.170.4.20 and with a PIP bank on subnet 10.3.3.x.
In order to configure the load balancer according to Figure 14.9, perform the
following commands:
P333R-LB-1(super)#interface router
Done!
P333R-LB-1(super-if:router)#ip address 193.170.3.1
255.255.255.0
Done!
P333R-LB-1(super-if:router)#exit
P333R-LB-1(super)#interface client
Done!
P333R-LB-1(super-if:client)#ip address 193.170.4.1