Filter
Top Products
User Manual Model 676 LOKPRINT® Customer Responsibility •
••
• 7
Customer Responsibility
Location of Printer
The printer weighs approximately 250 Lbs (113.4 Kg) and requires a table of
sufficient quality and strength to handle this load while the printer is operating.
AVERY DENNISON recommends an industrial type worktable having the
approximate dimensions of 96" (245.8cm) wide to 30" (76.2Ccm) deep to 32"
(81.3cm) high. Refer to Figure 2.
Figure 2 - Recommended Workstation Layout.
The location of the AVERY DENNISON 676 LKP printer should be based on
human factors. The printer should be located in an area that maintains optimum flow
of your product while providing for the operator’s comfort. AVERY DENNISON
has taken significant steps to ensure that the operator controls and operations are
easily accessible. This goal can only be met, however, if the printer is also located
with human factors in mind. These include the height of the printer, the space around
the printer, and the accessibility to the printer.
The AVERY DENNISON 676 LKP printer is a high-resolution 300 DPI thermal
printer. While AVERY DENNISON has designed the printer to be reasonably quiet,
it is recommended to locate the printer in an area where printing and cutting
repetitious noise is acceptable.
The AVERY DENNISON 676 LKP printer is designed to operate in conjunction
with the AVERY DENNISON Lokprint™ II box and either an Ultrasonic Finisher, a
Cold Knife Finisher or a Rewind Unit.