Filter
Top Products
User Manual Model 676 LOKPRINT® Control Panel Operation •
••
• 29
C
O
N
T
R
O
L
L
E
R
V
E
R
S
I O
N
T
C
B
1
0
9
3
4
This screen follows the FRONT PANEL VERSION screen.
This screen shows operating system version for the controller (TCB).
Pressing the MODE / Down Arrow key will take the user to the next screen.
Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
I M
A
G
E
R
V
E
R
S
I O
N
U
S
A
1
9
. 0
1
This screen follows the controller version number screen.
This screen shows operating system version for the imager (AT).
Pressing the MODE / Down Arrow key will take the user to the first screen under
Counts / Version.
Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
FEATURE SETUP SCREEN
P
R
E
S
S
E
N
T
E
R
F
O
R
F
E
A
T
U
R
E
S
E
T
U
P
This screen follows the LIFE COUNT \ VERSIONS screen.
Pressing ENTER shows the first screen under setup.
Pressing the MODE / Down Arrow key will take the user to the PRINT / CUT
POSITIONS screen.
Pressing the EXIT / Up Arrow key will take the user back to the HOME screen.
C
U
T
T
E
R
I S
E
N
A
B
L
E
D
P
R
E
S
S
E
N
T
E
R
T
O
D
I S
A
B
L
E
OR
C
U
T
T
E
R
I S
D
I S
A
B
L
E
D
P
R
E
S
S
E
N
T
E
R
T
O
E
N
A
B
L
E
This screen is the first screen of SETUP. This screen allows the cutter to be enabled
or disabled. Pressing ENTER will toggle from ENABLED to DISABLED and vice
versa. Pressing the MODE / Down Arrow key will take the user to the next screen.
Pressing the EXIT / Up Arrow key will take the user back to the "HOME" screen.
E
M
U
L
A
T
I O
N
M
O
D
E
:
N
O
N
E
N
E
W
E
M
U
L
A
T
I O
N
M
O
D
E
:
6
3
0
This screen follows the CUTTER ENABLE / DISABLE screen. This screen allows
the EMULATION MODE to be changed. Use the <YES and NO> keys to move
between NONE, 630, and 650 modes. Pressing ENTER will update the emulation
mode with the selection after new emulation mode. Pressing the MODE / Down
Arrow key will take the user to the next screen. Pressing the EXIT / Up Arrow key
will take the user back to the "HOME" screen.