Filter
Top Products
You can also set the communication values by using the Keyboard’s Main
Menu. The keyboard defaults are 9600 Baud, 8-bit Word Length, 2 Stop
Bits, No Parity, and No Flow Control.
1. Press X on the keyboard within the first two seconds when the
printer/keyboard are turned on to see the Keyboard’s Main Menu.
2. Select Setup. Press L or R until you see
SETUP
l COM2 (Scanner) r
3. Press Enter. You see a list of communication options to change (Baud
Rate, Word Length, Stop Bits, Parity, and Flow Control).
COM2 (Scanner)
Baud Rate r
4. Press Enter to change the Baud Rate. Use L or R to scroll through
the choices. Press Enter when the Baud Rate you need appears.
Continue through the list for the other communication settings and make
changes if necessary.
C-6 Configuring the System