Avocent AV2000BC Switch User Manual


 
5
CHAPTER
2
Installation
Getting Started
Before installing your AutoView 2000 switch, refer to the following list to ensure you have all
items that shipped with the appliance as well as other items necessary for proper installation.
Supplied with the AutoView 2000 switch
AutoView 2000 switch
Power cord
One null modem serial cable
Rack mounting kit
AutoView 2000 Installer/User Guide
AutoView 2000 Quick Installation Guide
Additional items needed
One AVRIQ module and UTP cabling per attached server or switch
Rack Mounting Your AutoView 2000 Switch
Your AutoView 2000 switch may be rack mounted using brackets supplied in your rack mounting kit.
Before installing the appliance and other components in the rack cabinet (if not already installed),
stabilize the rack in a permanent location. Install your equipment starting at the bottom of the rack
cabinet, then work to the top. Avoid uneven loading or overloading of rack cabinets.