Avocent AV2000BC Switch User Manual


 
Chapter 2: Installation 7
CAUTION: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.
Figure 2.2: Basic AutoView 2000 Switch Configuration
To connect an AVRIQ module to each server:
1. Locate the AVRIQ modules for your AutoView 2000 switch.
Analog User B
Configuration Port
(for updating firmware)
AutoView 2000 Switch
Servers 2-16
AVRIQ Module
Analog User A
Server 1